4月に誕生した銀座のNEWスポット「GINZA SIX」の1Fに、パーリーゲイツやマスターバニーエディションなどのブランドを展開する、TSIグルーヴ＆スポーツのニューコンセプトショップが誕生しました。
店舗情報：
the HOUSE
住所：東京都中央区銀座6-10-1 GINZA SIX 1階
営業時間：10:30〜20:30
TEL：03-6264-6925
URL：thehousetokyo.comorigexams.com
QUESTION 1
You have an Exchange Server 2013 organization named Contoso. The organization is configured to apply a disclaimer to all email messages sent to external recipients.
Your company works with a partner company https://www.pass4itsure.com/70-341.html exam dumps named A. Datum Corporation. A. Datum has an SMTP domain named adatum.com.
You need to ensure that email messages sent to adatum.com meet the following compliance requirements:
Messages sent to adatum.com must NOT include the disclaimer.
Messages that contain credit card numbers must NOT be sent to adatum.com.
If a user writes a message that contains a credit card number and the message is addressed to a recipient at adatum.com, the user must receive a notification before the message is sent.
What should you configure for each requirement?
To answer, drag the appropriate configuration to the correct requirement in the answer area. Each configuration may be used once, more than once, or not at all.
Additionally, you may need to drag the split bar between panes or scroll to view content.
Select and Place:
Select and Place:
Correct Answer:
QUESTION 2
You have an Exchange Server 2013 organization that contains three servers named EX1, EX2, and EX3. The servers are members of a database availability group (DAG) named DAG1. A mailbox database named DB1 is replicated to all the
members of DAG1.
EX3 experiences a complete hardware failure.
You need to restore EX3 on a new server.
You reset the computer account for EX3.
Which three actions should you perform next?
To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:
Select and Place:Correct Answer:
QUESTION 3
You have an Exchange Server 2013 organization that contains five servers.
Several employees plan to use Microsoft Outlook to collaborate on some projects.
You need to configure access to Outlook to meet the following requirements:
Several employees must be able to open only the Inbox of a user named User1.
Several employees must be able to copy email messages from any folder in the mailbox of a user named User2.
Several employees must be able to create only contacts in the mailbox of a user named User3.
Which cmdlets should you use?
To answer, drag the appropriate cmdlet to the correct requirement in the answer area. Each cmdlet may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.
Select and Place:
Select and Place:
Correct Answer:
QUESTION 4
You have an Exchange Server 2013 organization that contains two servers. The servers are configured as shown in the following table.You need to create a new database availability group (DAG) that contains EX1 and EX2.
Which three actions should you perform?
To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:
Select and Place:
Correct Answer:
QUESTION 5
Your company has an Exchange Server 2013 organization.
The company hires 200 temporary employees.
You create a mailbox for each temporary employee.
You create a new management role named CustomBaseOptions that uses MyBaseOptions as a parent. You create a new management role named CustomContactInfo that uses MyContactInfo as a parent.
You plan to apply the new management roles to the temporary employees.
You need to identify which management roles must be modified to prevent the temporary employees from performing the following task:
Adding a user photo
Viewing delivery reports
Viewing the Install Apps feature
Changing the value of the office location
Which management roles should you identify?
To answer, select the appropriate management role for each task in the answer area.
Hot Area:Hot Area:
Correct Answer:
QUESTION 6
Your company has two offices. The offices are configured as shown in the following table.
The offices connect to each other by using a WAN link that has a latency of more than 700 ms.
You plan to deploy an Exchange Server 2013 organization to meet the following requirements:
Ensure that users can access their mailbox if the WAN link fails.
Ensure that users can access their mailbox if a single server fails.
Ensure that users can access their mailbox if a single database fails.
You recommend deploying one or more database availability groups (DAGs) and mailbox database copies.
You need to identify which design meets the requirements for the planned deployment.
Which design should you identify?
To answer, select the appropriate design in the answer area.
Hot Area:Hot Area:
Correct Answer:
QUESTION 7
Your company plans to deploy an Exchange Server 2013 organization.
The network contains an Active Directory forest. The forest contains two domains named contoso.com and child.contoso.com. The forest contains one Active Directory site.
To contoso.com, you plan to deploy two servers that have Exchange Server 2013 installed. To child.contoso.com, you plan to deploy two servers that have Exchange Server 2013 installed.
To the contoso.com domain, you deploy a new member server named Server1 that runs Windows Server 2012.
You need to prepare the forest for the planned deployment of Exchange Server 2013.
Which three commands should you run from Server1?
To answer, move the three appropriate commands from the list of commands to the answer area and arrange them in the correct order.
Select and Place:
Select and Place:Correct Answer:
QUESTION 8
Your network contains four servers. The servers are configured as shown in the following table.
You create a new user account for a temporary user named User1.
You plan to create a new mailbox for User1.
You need to recommend which actions must be performed to ensure that User1 can modify only the values of his home phone number attribute and his office location attribute.
In which order should you perform the actions?
To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:
Select and Place:
Correct Answer: QUESTION 9
Your network contains an internal https://www.pass4itsure.com/70-347.html exam dumps network and a perimeter network.
You have an Exchange Server 2010 organization that contains an Edge Transport server named EX3.
You plan to upgrade the organization to Exchange Server 2013. You plan to replace EX3 and its functionalities with a new server named EX6 that has Exchange Server 2013 installed.
EX6 will be used to send all email messages to and receive all email messages from the Internet and to filter spam.
You need to recommend which steps are required to install EX6. EX6 must have the least number of Exchange Server roles installed.
Which three actions should you recommend performing on EX6 in sequence? (To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.)
Select and Place:
Select and Place:
Correct Answer:
QUESTION 10
You have an Exchange Server 2013 organization that contains three servers. The servers are configured as shown in the following table.All of the servers are part of a database availability group (DAG) named DAG1.
The databases are configured as shown in the following table.
All of the databases replicate between all the members of DAG1.
You plan to move all mailboxes from DB1 to DB2.
You need to ensure that the passive copies of DB1 are in a healthy state before you move the mailboxes.
Which command should you run? (To answer, select the appropriate options in the dialog box in the answer area.)
Hot Area:
Hot Area:
Correct Answer:
QUESTION 11
You have an Exchange Server 2013 organization that contains several custom RBAC management roles.
You need to identify which RBAC scopes must be used to meet the following requirements:
Manage only the mailboxes of the users in the sales department.
Manage the properties of all the mailbox databases.
Which RBAC scopes should you identify? (To answer, drag the appropriate RBAC scopes to the correct requirements. Each RBAC scope may be used once, more than once, or not at all. You may need to drag the split bar between panes or
scroll to view content.)
Select and Place:
Select and Place:
Correct Answer:
QUESTION 12
You have an Exchange Server 2007 organization.
You are migrating the organization to Exchange Server 2013. The migration will last eight weeks.
All servers are in a site named Site1.
The servers in the organization are configured as shown in the following table.
/* TABLE MISSING */
Users who have mailboxes on all of the servers will access Outlook Anywhere by using the mail.adatum.com name.You need to recommend which servers must be associated to the autodiscover.adatum.com and mail.adatum.com names.
Which servers should you identify for each name? (To answer, drag the appropriate servers to the correct names. Each server may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to
view content.)
Select and Place:
Select and Place:
Correct Answer:
QUESTION 13
You have an Exchange Server 2013 organization named adatum.com. The organization contains a server named Server1. Server1 is a member of a Database Availability Group (DAG) named DAG1.
You have a user named Sales1 in the Sales department.
You need to prevent Sales1 from submitting more than 75 email messages per minute to the Exchange Server organization by using Microsoft Outlook.
Which three commands should you run in sequence? (To answer, move the appropriate three commands from the list of commands to the answer area and arrange them in the correct order.)
Select and Place:
Select and Place:Correct Answer:
QUESTION 14
You have an Exchange Server organization that contains three servers. The servers are configured as shown in the following table.
You need to create a new database availability group (DAG) that contains EX1 and EX2.
Which three actions should you perform in sequence? (To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.)
Select and Place:
Select and Place:Correct Answer:
QUESTION 15
Your network contains an Active Directory forest named contoso.com. The forest contains two sites named Site1 and Site2.
You have an Exchange Server 2013 organization that contains two servers. The servers are configured as shown in the following table.
An administrator creates a new Active Directory site named Site3. The administrator creates mailboxes for the users in Site3. All of the mailboxes of the Site3 users are located on EX1.
Site3 contains a domain controller named dc3.contoso.com. The Site3 users report that sometimes, when they open Microsoft Outlook, it takes a long time to access their mailbox.
You need to reduce the amount of time it takes for the users to access their mailbox.
Which command should you run? (To answer, select the appropriate options in the dialog box in the answer area.)
Hot Area:
Hot Area:
Correct Answer:
QUESTION 16
You deploy an Active Directory forest that contains two domains named contoso.com and child.contoso.com.
You plan to deploy Exchange Server 2013 servers to the child.contoso.com domain.
You need to prepare Active Directory for the installation of the first Exchange Server 2013 servers.
Which command should you run in each domain? (To answer, drag the appropriate commands to the correct domains. Each command may be used once, more than once, or not at all. You may need to drag the split bar between panes or
scroll to view content.)
Select and Place:Select and Place:
Correct Answer:
QUESTION 17
You have an Exchange Server 2013 organization that contains a database availability group (DAG). There are four copies of every mailbox database. One of the copies is a lagged copy configured to have a replay lag time of 14 days.
All mailboxes have single item recovery enabled. All databases are configured to have a deleted item retention period of seven days.
A company executive reports that an email message, which was deleted 10 days ago, must be restored.
You need to ensure that you can recover the email message from the lagged copy of the mailbox database. The solution must preserve the lagged copy of the mailbox database.
Which three actions should you perform?
To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:
Select and Place:
Correct Answer:
QUESTION 18
Your network contains an Active Directory forest. The forest contains a single domain named fabrikam.com.
You have an Exchange Server organization that contains four servers. The servers are configured as shown in the following table.
You plan to enable Outlook Anywhere for all users. You plan to configure the users to connect to the name oa.https://www.pass4itsure.com/70-410.html exam dumps fabrikam.com. The IP address of oa.fabrikam.com points to EX3.
You need to ensure that users on EX2 and EX4 can access their mailbox by using Outlook Anywhere.
Which command should you run on EX1 and EX3? (To answer, drag the appropriate cmdlets to the correct servers. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to
view content.)
Select and Place:Select and Place:
Correct Answer:
QUESTION 19
You have an Exchange Server 2013 organization that contains a server named Server1.
A user named User1 has an administrative assistant named Assistant1. A user named User2 has an administrative assistant named Assistant2.
You need to configure access to Outlook to meet the following requirements:
Assistant1 must be able to send email messages as a User1.
Assistant2 must be able to send email messages on behalf of User2.
Which cmdlets should you use? (To answer, drag the appropriate cmdlets to the correct requirements. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)
Select and Place:
Select and Place:
Correct Answer:
QUESTION 20
Your network contains two Active Directory sites named MainSite and DRSite.
You have an Exchange Server 2013 organization that contains two servers. The servers are configured as shown in the following table.
The active copy of DB1 is located on EX1. There are typically 100 MB of log files queued on EX1.
You need to recommend a procedure to allow administrators to mount the mailbox database copies on EX2 if EX1 fails. The recovery point objective (RPO) for mailbox data is 200 MB.
Which command should you recommend running? (To answer, select the appropriate options in the answer area.)
Hot Area:Hot Area:
Correct Answer:
QUESTION 21
You have an Exchange Server 2013 organization.
You create a script named New-CustomMailbox.ps1 to create mailboxes based on your company's requirements.
You create a role group named Mailbox Provisioning.
You need to ensure that the members of Mailbox Provisioning can create new mailboxes only by using New-CustomMailbox.ps1.
In which sequence should you run the commands? (To answer, move all of the commands from the list of commands to the answer area and arrange them in the correct order.)
Select and Place:
Select and Place:
Correct Answer:
QUESTION 22
Your company has three main offices. Each office is configured as an Active Directory site as shown in the exhibitYou have an Exchange Server 2013 organization. Each office contains Exchange servers.
All users access their mailbox by using Outlook Web App. All of the users have a mailbox on a server in their respective office.
Use the drop-down menus to select the answer choice that completes each statement.
Hot Area:
Hot Area:
Correct Answer:
QUESTION 23
You are migrating an existing Exchange Server 2007 organization to Exchange Server 2013. You expect the migration to last several weeks.
The servers in the organization are configured as shown in the following table.
Users who have mailboxes on all of the servers will access Outlook Anywhere by using the mail.contoso.com name.
You need to recommend which servers must be associated to the autodiscover.contoso.com and mail.contoso.com names.
Which servers should you identify for each name?
To answer, drag the appropriate servers to the correct name in the answer area. Each server may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.
Select and Place:
Select and Place:
Correct Answer: QUESTION 24
You have an Exchange Server 2013 organization that contains a database availability group (DAG) named DAG1. The organization contains three servers. The servers are configured as shown in the following table.
EX1 and EX2 are members of DAG1. EX1 has an active copy of a database named DB1 and a passive copy of a database named DB2. EX2 has a passive copy of DB1 and an active copy of DB2.
You plan to create a public folder named Invoices.
You need to ensure that users can access the Invoices public folder if one of the DAG members fails. The solution must ensure that the users can send email messages to the Invoices public folder.
Which three actions should you perform in sequence? (To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.)
